How to Choose and Maintain Pottery Teapot
Table of Contents
Top Best Pottery Teapot on Amazon
Why You Need a Pottery Teapot?
The tea experience is not only dependent on the leaves and the water used while brewing. The teapot is also a significant factor that affects the flavor of your beverage. It’s essential to get the best teapot and perform proper maintenance to make your teapots last. The pottery teaspoon’s tea soup is much strong and authentic than making tea with automatic tea makers. Although automatic tea makers are fast, the ingredients of tea leaves have less time to dissolve into the water.
Here are the things you need to consider when shopping for a new teapot set.
How to Choose the Best Pottery Teapot?
#1 Knock the body of the teapot
Teapots that are made with a higher fire point are favored by a lot of tea shoppers out there. If a lump of clay is cooked at a higher temperature, the final product would be more durable. You can make a quick comparison by knocking the body of the teapot gently with the lid. Teapots with higher pitch are cooked at higher temperatures, and therefore, will last longer.
#2 The three-point method
Nothing is more frustrating than a teapot that leaks the tea when you’re pouring it. Before you buy a teapot, make sure that the build will allow easy pouring without any leaks and other nuisances. One way to test a pot without using liquid is through the three-point method. The handle, teapot opening, and the mouth should be leveled at one equal point. To check this, turn the teapot upside down on a flat surface. There should be no balance disturbance if the three points are leveled properly. This test might not be applicable for pots that have specific designs. But for standard shaped ones, this test will always work.
#3 Well-fitted and loose of opening
Well-made teapots are easy to use and clean. With this principle, the lid should be easy to remove and put back at a moment’s notice. However, a poorly made lid would let the aroma of the tea escape, diminishing the enjoyment you get when drinking. Therefore, a teapot lid should be well-fitted. To test this, the lid should be at the same size as the opening. If the opening is too wide, the lid will fall to the pot. Meanwhile, a smaller opening will make lifting the lid harder.
#4 Filter check
Take a look at the inside of the teapot, you might or might not find a filter near the mouth. There are different kind of filters which is perfect for different kind of teas. Consider what type of tea you will brew before taking a teapot home. For example, if the pot has no filter, that pot is best used for smaller tea leaves. On the other hand, if the teapot has a nested round ball filter (a ball filter with a lot of holes), larger tea leaves are the best.
#5 Materials used
Different teapots are made with different materials throughout the years. Some pots are made with glass, ceramic, and even cast iron. If you want to buy a teapot for blooming teas or if you want to watch the liquid action while pouring, glass teapots are for you. Meanwhile, Ceramic pots are best for those who want easy cleaning. Cast iron pots are for those who want to retain the heat of the tea for an extended amount of time. A good pottery teapot may not be expensive but it will enhance the flavor of the teas brewed on it as time goes by.
How to take care of pottery teapots?
1. Wash the teapot without soap
To clean your pottery teapot, the best way to do so is to rinse it with hot water. Because of its flavor-absorbing properties, it is better to avoid soap altogether. Soap counteracts the flavor retaining of the pot. But what about stains? Fortunately, a pottery teapot pot with more stains tends to represent age and rarity. Teas that are brewed in older pottery teapot have more flavor and more aroma. For the other type of teapots, you can wash with soap to avoid developing stains, especially with glass pots.
2. Pour warm water in the teapot before usage
This is an essential tip in taking care of your teapot, especially if you live in a location with a colder climate. Before pouring hot water altogether, slowly pour lukewarm water inside the pot. This is to avoid the cracks that usually formed because of instant change in temperature. This tip is applicable for pottery and ceramic pots.
3. Make sure the inside and outside is dry
Before storing your pot, make sure that all the nooks and crannies are dry. Separate the pot from its lid when storing the items and place it upside down to let the air dry the insides. If the pot is not cleaned and dried correctly, there would be a moldy or musty smell that will ruin your next brew. If a mold growing in your pottery teapot, boil it with water and use baking soda to get rid of the smell.
4. Use soft cloth instead of a sponge when cleaning
For delicate pots, make sure to handle your wares gently. Instead of using a sponge or any abrasive cleaning materials, use a soft cloth, and gently apply pressure. Because pottery teapot is not like a food container, it has no oily ingredients. Air-drying is preferred because it reduces the damage done from cleaning.
5. Let the pot rest before using again
Instead of using a teapot every single day of the week, it is recommended to let the pot rest. This way, the pot would have an easier time absorbing the flavor for the next usage. Store it in a well-ventilated place shielded with soot and dust. If you make multiple kinds of tea at home, get a separate pot to avoid mixing of flavor.
Buying and maintaining a teapot regularly might be a very arduous task, but it would be worth it in the long run. If you clean the pot regularly, you would have a better tea time with your friends and avoid buying a new set altogether. However, regular maintenance is not enough to make sure that a teapot would last for a long time. Make sure that you’re getting a pot with excellent durability, build, and is easy to use.